Thank you for purchasing an emulator from our shop. Our emulators are simple plug & play devices. But in case of problems with installation with have prepared an instruction. First of all you need to make sure your seat mat is broken. If your airbag warning light blinks in a sequence 4-7 or 4-8, diagnostic computer shows that the seat occupancy sensor is faulty. In that case do the following procedure:

1. Turn the ignition off.

2. Find the white 3-pin plug mat with 3 wires (colors: white, red, brown) under the passenger seat. The mat plug is located in the front part of the seat. In the back there are two other plugs: white and yellow. These are not related to the seat mat. Sometimes the seat mat plug may be hidden somewhere in the seat's foam. In this situation, it is best to find the plugs that are at the back of the seat and follow the cable towards the seat (not the car).

3. Unplug seat mat plug and connect the seat mat emulator in its place.

4. The SRS error should disappear. Usually, after connecting the emulator, it is necessary to remove the error using the diagnostic software.

That's all!