Table of Contents

BMW (Exx Series) - all models except 5 Series & 6 Series & X5

BMW 5 Series E60/E61 & 6 Series E63/E64 & X5 E70

BMW (Fxx Series) - all models


BMW (Exx Series) - all models except BMW 5 Series & BMW 6 Series

- 1 Series E81/E82/E87/E88
- 3 Series E90/E91/E92/E93
- 7 Series E65/E66/E67
- X1 E84
- X3 E83
- Z4 E89

Take a look at the installation video: CLICK HERE

1. Turn the ignition off.

2. Find a big yellow connector box under the seat.

3. Unlock and open the connector box.

4. Remove the 'L' shaped plug from the connector box by sliding it to the left.

5. Using a small screwdriver, push the pins in holes and remove the seat belt wires (black and red). Then insert the seat belt emulator wires in their place.

6. Insert the seat belt plug back into the connector box and lock it. That's it.


BMW 5 Series E60/E61 & 6 Series E63/E64 & X5 E70

Take a look at the installation video: CLICK HERE

1. Turn the ignition off.

2. Find a big yellow connector box under the seat.

3. Open the connector box.

4. Locate the seat belt plug (black and red wires) and unplug it.

5. Using a small screwdriver, push the pins in holes and remove the seat belt wires. Then insert the seat belt emulator wires in their place.

6. Insert the seat belt plug back into the connector box. That's it.

Instruction in case the emulator does not work right away

The seat belt emulator has got a switch hidden inside the box. If the seat belt warning remains after connecting the emulator, please open the box and change the switch setting (when the ignition is off). The switches are marked as 1 and 2.


BMW (Fxx Series)

Take a look at the installation video: CLICK HERE

1. Turn the ignition off.

2. Locate the seat belt plug (black and red wires) and unplug it.